2% off2% off

FOSROC BRUSHBOND GREY – 27.28 KG

Name: FOSROC BRUSHBOND GREY - 27.28 KG
SKU: 16153
Price: 2240.00 INR
Availability: InStock

0 customer reviews

Vendor: Civilismart

Original price was: ₹2,290.00.Current price is: ₹2,240.00.

Bulk Order →

Brand: Fosroc
Product Name: Brushbond Grey
Weight: 27.28 KG
Usage: Cementitious waterproofing coating for concrete and masonry surfaces
Note: Provides excellent adhesion, flexibility, and durability for protecting structures from water ingress.

Categories: Building Material Chemicals Tag: FOSROC

Product Description

Uses;-

Brushbond provides a seamless, waterproof coating suitable for use in water tanks, reservoirs, swimming pools, roofs and to ensure water tightness

Brushbond effectively protects against concrete decay providing a long lasting barrier to waterborne corrosive salts and atmospheric gases.Brushbond is designed to re-face and even out variations in concrete and masonry surfaces. Brushbond effectively seals concrete masonry walls and bridges the shrinkage cracks which are static

Brushbond provides a tough and durable coating which cannot be easily damaged or worn away.

Advantages:-

Minimum surface preparation needed – Low labour costs.
Applied directly to the damp concrete and masonry
Excellent adhesion – Bonds to porous and nonporous surfaces.
Non-toxic-ideal for potable water tanks
Waterproof – Excellent for damp-proofing basements
Breathable-allows transmission of water vapour from interior of building
Excellent for concrete roof, leaking brick and masonry walls
Good resistance to Carbon dioxide and Chloride ion diffusion

Application Instructions:-

Preparation:-

All the surfaces which are to receive Brushbond, must be free from oil, grease, wax, dirt or any other form of foreign matter which might affect adhesion. Spalled and deeply dis intergrated concrete should be removed to sound concrete and repaired with Renderoc System.

Mixing;-

Brushbond liquid is poured into a plastic or metal drum. To this, an equal volume of clean fresh water is added, for brush application consistency. Then mixing is started with a slow speed drill (350-450 rpm). The powder component is added gradually to the liquid avoiding lump formation and mixed for 2-4 minutes. Mix and use. More material should not be mixed than can be used within pot life. Retempering with water should not be done. Keep on stirring during application.

Mixing Ratio:-

Brushbond Components Indl.pack Small pack

Brushbond Powder 23 kg 6 kg

Brushbond Liquid 4 L 1 L

Water 4 L 1 L

Application;-

For best results moisten the surface before coating with Brushbond. Apply the mixed material using a short, stiff bristle brush preferably 100 to 150mm width like a paint. Trowel applications can be undertaken as necessary using the correct mixing ratio to obtain satisfactory consistency. Brushbond shall be applied in two coats to achieve 1mm thickness. The second coat of Brushbond shall applied as soon as the first coat has reached touch dry state.

On hot substrates, i.e., over 400C surface temperature, a primer coat of mixed Brushbond Powder and water with a slurry like consistency should be applied. Prime only areas that can be coated with Brushbond Powder before the primer dries. Material should not be applied at temperatures below 100C. It is recommended that for general re-surfacing the total thickness of the applied material be 1 to 2 mm.Areas subjected to moderate and heavy loads/hydrostatic pressure, minimum 2mm thickness coating is recommended with screed above. Allow the Brushbond to dry before covering with screed. Sprinkle coarse sand on wet surface of final coat for better adhesion of screed. Average drying time is 4 to 6 hours at normal temperatures

Subsequent Finishes:-

Brushbond provides an aesthetically pleasing surface finish texture depending on the method of application, and does not normally require any further surface finishes.

Brushbond is however compatible with most forms of subsequent coatings.

Cleaning:-

Brushbond should be removed from tools and equipment immediately after use with clean water. Hardened material can be removed mechanically.

Packaging:-

Brushbond powder grey is supplied as a package of 23kg (Industrial Pack) / 6kg powder. Brushbond Liquid is supplied in 4 litres / 1 litre jerry can

Storage;-

Brushbond has a shelf life of 12 months in unopened packs, if kept in a dry store. In high humidity locations, the shelf life may be reduced to less than 6 months. Prevent Brushbond liquid from freezing.