27% off27% off

FOSROC BRUSHBOND TGP – 15 KG

Name: FOSROC BRUSHBOND TGP - 15 KG
SKU: 16169
Price: 1465.00 INR
Availability: InStock

0 customer reviews

Vendor: Civilismart

Original price was: ₹2,000.00.Current price is: ₹1,465.00.

Bulk Order →

Brand: Fosroc
Product Name: Brushbond TGP
Weight: 15 KG
Usage: Crystalline waterproofing coating for concrete and masonry surfaces
Note: Provides deep penetration, long-lasting protection, and self-healing properties for cracks in the substrate.

Categories: Building Material Chemicals Tag: FOSROC

Product Description

Uses;-

Brushbond TGP crystalline waterproofing system is used for waterproofing against the positive or negative sides of hydrostatic heads of water, for damp proofing, repairing cracks, plugging holes, sealing wall – floor joints and stopping active leaks in a wide variety of conditions including :

Sewage treatment and water treatment plants, tanks, foundations, tunnels and manholes.
Terrace garden, balconies, sunshades etc.
Roof and Sunken slabs
Industrial and office buildings
Reservoirs, water holding structures etc.

Advantages:-

Meets the requirements as per ANSI/NSF Std 61 for suitability to potable water
Penetrates concrete, seals capillary tracts
Contains no chloride
Easy to apply
Resists chemical attack of sewage and industrial wastes
Suitable for external and internal applications.

Instructions for use:-

Surface preparation

Old concrete

Surfaces must be clean and sound. Remove all oil, dirt, laitance and other contaminants by water blasting.

Water blasting is preferred for surface preparation because it mechanically cleans and roughens the surface, is environmentally safer and leaves the surface saturated with water. Surface must be damp for application of Brushbond TGP* crystalline waterproofing system, concentrate

New concrete:-

After forms are stripped, acid etch or water blast as above to remove form oils and laitance. Surface must be left damp for application on Brushbond TGP* crystalline waterproofing system. Construction joints, cold joints and non-leaking joints greater than 0.25mm wide must be cut in V-groove shape and filled with Brushbond TGP* crystalline waterproofing system in mortar consistency

Mixing:-

For best results, clean, potable water should be added to Brushbond TGP* crystalline waterproofing system concentrate.

Application;-

Existing concrete

3 parts of powder shall be added to 1 part of clean and mixed thoroughly with a slow speed drill equipped with a paddle. For larger batches, mixing shall be done with a mortar mixer. Do not mix more material than can be used in 20 minutes @ 240 C, 50% R.H. If mixture thickens, it shall be restirred to reduce consistency. Extra water should not be added.

Curing and Protecting;-

Brushbond TGP* crystalline waterproofing system application must be kept moist for a minimum of 48 hours. After initial set, moist curing, using continuous water spray is recommended. Treated surfaces shall be fog sprayed 3 to 4 times daily for the 48 hour period. For warmer climates, more frequent spraying may be required. It is important to keep the Brushbond TGP* crystalline waterproofing system moist to allow the crystal formation to occur. The surfaces shall be protected from foot traffic for 48 hours or heavy traffic for 7 days.

Freshly applied Brushbond TGP* crystalline waterproofing system must be protected from extreme weather conditions such as rain, strong winds, high temperatures and freezing for a period of not less than 48 hours after application. A minimum of 7 days of air curing shall be allowed prior to immersing the surface in water

Clean up;-

Prior to curing, Brushbond TGP* crystalline waterproofing system concentrate may be cleaned from tools and other surfaces with water