6% off6% off

FOSROC CEBEX 100 – 225 G

Name: FOSROC CEBEX 100 - 225 G
SKU: 16183
Price: 85.00 INR
Availability: InStock

0 customer reviews

Vendor: Civilismart

Original price was: ₹90.00.Current price is: ₹85.00.

Bulk Order →

Brand: Fosroc
Product Name: Cebex 100
Weight: 225 G
Usage: Expanding grout admixture for cement grouts
Note: Enhances the strength and durability of grouts, reduces shrinkage, and improves bond to surrounding surfaces.

Categories: Building Material Chemicals Tag: FOSROC

Product Description

Uses;-

Cebex 100 is an admixture for cementitious grouts where a reduced water/cement ratio and positive expansions are required. Applications include bed grouting, duct grouting, non-shrink infilling and jointing.

Advantages;-

Gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious grout.
Reduced water/cement ratio mixes in the grout mix ensures low permeability and long term durability in service.
Gives grout high fluidity with low water/cement ratio, thus making placement or injection of the grout easy.
No metallic iron content to corrode and cause staining or deterioration due to rust expansion in the grout.
Composition allows high early strength development in grouts, without the use of chlorides.

Specification clauses:-

Performance specification;-

All grouting (specify details and areas of application) must be carried out with a cement based grout incorporating a plasticised, expanding powder admixture. The grout admixture must be iron-free and chloride-free and shall be added to the cement grout in the proportion of 225g per 50kg of cement. The grout admixture shall provide an expansion of up to 4% in the plastic grout, by means of a gaseous system. The grout admixture must be stored, handled and mixed strictly in accordance with the manufacturer’s instructions

Application instructions;-

Mixing ;-

For best results a mechanically powered grout mixer must be used. For quantities upto 50kg, a slow speed drill fitted with a high shear paddle is suitable. Large quantities will require a high volume drum mixer. It is essential that machine mixing capacity and labour availability is adequate to enable the grouting operation to be carried out continuously. This may require the use of a holding tank with provision for gentle agitation to maintain fluidity. The selected water content should be accurately measured into the mixer. The cement (and sand if required) shall be slowly added to Cebex 100. Mixing shall be continued for 5 minutes, making sure that a smooth even consistency is obtained.

Application;-

It shall be ensured that areas to be grouted are clean, sound, and then pre-wetted. The unrestrained surface area of the grout must be kept to a minimum. The grout shall be placed within 20 minutes of mixing to gain the full benefit of the expansion process. Usual placing or pumping procedures shall be adopted ensuring a continuous operation.

Curing:-

On completion of the grouting operation, any exposed areas which are not to be cut back should be thoroughly cured by means of water application, concure curing membrane or wet hessian.

Cleaning:-

Grouts mixed with Cebex 100 should be removed from tools and equipment with clean water immediately after use. Cured material should be removed mechanically or with Reebaklens, multi purpose cleaning agent.

Limitations:-

Cebex 100 is incompatible with High Alumina Cement

Estimating;-

Packaging:-

Cebex 100 is supplied in 225 g packs

Dosage:-

OPC Concreting sand Water Cebex 100 Approx Yield

50kg – 20-22 litres 225 g 36 litres

50kg 50 kg 22-24 litres 225 g 57 litres

Note : For grout, mortar or concrete mixes with an aggregate/ cement ratio more than 1, 4 x 225 g units of Cebex 100 per 100 kg of cement, shall be used

Shelf life:-

Cebex 100 has a shelf life of 6 months if kept in a dry store in its original packing. High temperature and humidity storage may reduce this period.