30% off30% off

PG 400 WHITE FOR FIXING GLASS MOSAIC AND NATUREL STONES

Name: PG 400 WHITE FOR FIXING GLASS MOSAIC AND NATUREL STONES
SKU: 12430
Price: 760.00 INR
Availability: InStock

Vendor: CIVILIS MART TILES

Original price was: ₹1,080.00.Current price is: ₹760.00.

BRAND: –

AREA OF APPLICATION

Suitable for fixing tiles of apparent porosity less than or equal to 3% Interior and Exterior bonding of natural stones, mosaic tiles (they are not sensitive to moisture) Interior and Exterior bonding of ceramic and vitrified tiles of every type.

COVERAGE
- 20kg bag at 6mm thickness, may vary upon notch trowel size at site condition

Categories: Chemicals Tiles Tag: AGL

Product Description

DESCRIPTION

1. PG-400, is a grey cementitious polymer modified tile adhesive for interior and exterior installation of ceramic, vitrified , natural stones, pavers & bricks. 2. PG-W400, is a white cementitious polymer modified tile adhesive for interior and exterior installation of glass tiles, natural stone, composite marble stone etc. Note: Both PG-400 & W400 are ready to use single component adhesive for interior and exterior application of all types of tiles and natural stones. Only water needs to be added.

BENEFITS

Easy application and better work ability. Excellent adhesion, non-shrinkage. Excellent waterproofing characteristics. High Strength Good open wet time. Needs no curing & soaking of tiles.

SURFACE PREPARATION

Surface should be sound and clean, free from dust, grease, oil, loose material, paint etc. Movement joints to be filled with suitable joint filler. The surface must be in SSD condition before application

APPLICATION INFORMATION MIXING

Mix 20kg bag of PG-400 & W400 in approx 6litre to 6.5litre of clean water and mix thoroughly until a slump free mortar is achieved. Mix with a trowel or slow speed drills for homogeneous mix. Allow it to slake for 5 minutes. Mix the required quantity, which can be used within the desired pot life, not exceeding 1m² area.

APPLICATION

Spread the adhesive uniformly on the surface as required with proper notch trowel to get the required depth of 3-6mm. Place the tile on the adhesive surface and press firmly into position with a slight twisting action, ensure that good contact is maintained to the back of each tile, eliminating the possibility of any air voids. Tiles should be applied within 15 to 20 minutes of adhesive being applied. Keep adequate joints between two tiles using spacers. Clean off surplus adhesive from the tile face and between joints

PRECAUTIONS

Always add powder to water and never add water to powder. Not recommended for wall tiling, and tile on tile application. Never add excess water than recommended. Surface should be hard and in sound condition for door tiling. Do not use in damp Conditions. Not recommended for tiling on paint, wood, metal and gypsum

SHELF LIFE & STORAGE

Shelf life is one year from the date of manufacturing. Store the material in cool and dry place away from moisture.

TECHNICAL BASE

All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.

HEALTH AND SAFETY INFORMATION

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data.