1% off1% off

FOSROC HYDROPROOF XTRA – 20 LITER

Name: FOSROC HYDROPROOF XTRA - 20 LITER
SKU: 16268
Price: 4740.00 INR
Availability: InStock

0 customer reviews

Vendor: Civilismart

Original price was: ₹4,800.00.Current price is: ₹4,740.00.

Bulk Order →

Brand: Fosroc
Product Name: Hydroproof Xtra
Weight: 20 Liters
Usage: Waterproofing admixture for cementitious materials, enhancing water resistance and reducing permeability
Note: Improves the durability and longevity of concrete and mortar by providing effective waterproofing properties.

Categories: Building Material Chemicals Tag: FOSROC

Product Description

Uses:-

Provides an effective and economical method of waterproofi ng to concrete and masonry surfaces, by mixing with cement and application by brush.

Advantages:-

Non – toxic, non-flammable and user friendly
Provides a tough, impermeable waterproof membrane
Can be applied by brush, on horizontal and vertical surfaces
Excellent adhesion to concrete and masonry surfaces
Protects concrete and mortar from natural elements such as wind, rain, sunlight
Breathable – allows inside water vapour to escape

Areas of application:-

Below sloping screed or waterproof plaster on :

Roofs, terraces and balconies as a sandwich layer
Pools and fountains
Reservoirs and channels
End walls subjected to rain

Application instructions:-

Preparation:-

All surfaces to be treated with Hydroproof Xtra must be thoroughly cleaned by a wire brush or other mechanical means, to remove all dust, laitence or debris. The surface must also be free from oil, grease, wax or any other form of foreign matter which might affect adhesion. Spalled and deeply disintegrated concrete or mortar must be removed to a sound substrate and repaired suitably before coating.

Priming:-

Before application, the surface should be primed with Hydroproof Xtra as follows: 1 part of Hydroproof Xtra : 2 parts of Water : 4 parts of Cement Mixed material with the above proportion will cover an area of 16-17m2 for 1L of Hydroproof Xtra.

Topcoat:-

Hydroproof Xtra acrylic polymer shall be mixed with neat cement in the ratio of 1:2 respectively, to obtain a uniform and consistent slurry avoiding any lump formation. This can be achieved with a low duty, low speed drilling machine attached with a mixing paddle. Do not mix for more than 2 minutes. Do not mix more material than which can be used within the pot life. Retempering the mix with water should not be done. Occassionally stirr the material till the entire quantity is applied, so that solids do not settle at the bottom of the container.

Mixing Ratio:-

Hydroproof Xtra liquid Neat cement

0.5L 1 kg

1L 2kg

5L 10 kg

20L 40 kg

For white colour – mix white cement, for other colours, add cement compatible pigments to white cement.

Application:-

For best results, wet the surface before coating. Apply the mix with a short, stiff bristle brush like a paint to an approximate thickness of 1 to 2mm. During the fi rst 12 hours of curing, Hydroproof Xtra surface must be protected from abrasion, rain or other adverse conditions. No traffi c shall be allowed within 48 hours after application.

Normally 2 coats of application of Hydro-proof Xtra are recommended. First coat should be allowed to air dry for 5 – 6 hours. After application of the final coat, initial air drying shall be allowed for 2 to 6 hours. During this period water should not be used for curing. Moist curing should be done for the next 24 hours by spraying water on Hydroproof Xtra coating. Following moist curing, Hydro-proof Xtra should be allowed to dry for three days before subjecting it to submersion in water.

Packaging:-

Available in 0.5, 1, 5 & 20 L packs

Storage:-

Hydro-proof xtra liquid has a shelf life of 12 months, when stored in unopened containers under normal warehouse conditions.