10% off

SIKA CERAM – Tile adhesive – SikaCeram-125 Easy Fix (20kg Bag)

Name: SIKA CERAM - Tile adhesive - SikaCeram-125 Easy Fix (20kg Bag)
SKU: 15874
Availability: InStock

0 customer reviews

Vendor: Civilismart

₹405.00 – ₹670.00

Bulk Order →

Brand: Sika
Product Name: Ceram – 125 Easy Fix
Weight: 20 KG Bag
Usage: Ready-to-use tile adhesive for fixing ceramic and porcelain tiles on floors and walls
Note: Provides excellent adhesion, easy application, and high durability

20 KG
40 KG

Clear

Add to wishlist

SKU: N/A Categories: Chemicals Tiles Tag: SIKA

Product Description

USES :-

Bonding the following types of tiles:

Vitrified
Ceramic
Earthenware

Bonding tiles for the following applications:

CHARACTERISTICS / ADVANTAGES: –

▪ Layer thickness: 1–10 mm
Reduced vertical slip
Smooth application
Easy to use, only water to be added
Better bond than conventional cement-based mortar
Self-curing
Bonding floor and wall tiles
Suitable for absorbent ceramic tiles and vitrified tiles Typical bonding substrates: Cementitious screed, concrete, plaster, ceramic tiles

PRODUCT INFORMATION: –

PRODUCT DECLARATION: – C1T* according to EN 12004-1 C1T* according to ISO 13007-1 *Tensile adhesion strength test after freeze-thaw cycles not conducted due to tropical climatic conditions
CHEMICAL BASE: – Portland cement, selected aggregates, water retention additives, redispersal polymer
PACKAGING: – 20 kg bag and 40 kg bag
SHELF LIFE: – 12 months from date of production
STORAGE CONDITIONS: – The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +35 °C.
APPERANCE / COLOUR: – Grey or White powder

TECHNICAL INFORMATION: –

Tensile adhesion strength: –

Initial / dry condition ≥ 0.5 N/mm2
After water immersion / wet condition ≥ 0.5 N/mm2
After heat ageing ≥ 0.5 N/mm2
After > 20 minutes, open time ≥ 0.5 N/mm2

Slip resistance: –

≤ 0.5 mm

SYSTEM INFORMATION: –

System structure: –

For the following substrates, a primer must be used:

Substrate: – Calcium sulphate substrate (gypsum, gypsum fiber boards, calcium sulphatic screed)

Primer: – Sika Ceram-935 Floor Leveler Primer diluted with water in ratio 1:1

APPLICATION INFORMATION: –

Mixing ratio: –

Packing: – 20 kg, Grey

Water to powder ratio by weight: – 0.22–0.24

Quantity of water per bag: – 4.4–4.8 L

Fresh mortar density: –

Grey 1.7 ± 0.2 kg/L (+27 °C)

White 1.7 ± 0.2 kg/L (+27 °C)

Consumption: –

Consumption is dependent on the substrate, surface profile, roughness, size of the tiles, the joints between them and application technique (i.e., single spreading / floating method or double spreading / buttering method). Apply product to a test area to calculate the exact consumption for the specific substrate conditions and proposed application.

As a guide for a single adhesive layer:

Size of tiles – Notched trowel size – Consumption (Grey) dry powder – Consumption (White) dry powder

Small 6 mm 3.00–3.50 kg/m2 2.50–3.00 kg/m2

Medium 8 mm 4.25–4.75 kg/m2 3.25–3.75 kg/m2

Large 10 mm 5.00–5.50 kg/m2 4.50–5.00 kg/m2

Layer thickness 3 mm min.

Ambient air temperature: – +5 °C min. / +45 °C max.

Substrate temperature: – +5 °C min. / +45 °C max.

Maturing time: – ~5 minutes

Pot life: – ≥ 90 minutes (100 g mass, +27 °C)

Open time: – > 20 min (EN 12004-2 / ISO 13007-2)

Adjustability time: – ~30 min (+27 °C)

Applied product ready for use: –

Use Waiting time

Grouting floors / walkability 24–36 hours

Grouting walls 4–6 hours

Water immersion ~21 days

Values determined in laboratory conditions: +23 °C ± 2 °C, R.H. 50 % ± 5 %. Higher temperatures will reduce the indicated waiting time, lower temperatures increase waiting

BASIS OF PRODUCT DATA: –

All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.

ECOLOGY, HEALTH AND SAFETY: –

User must read the most recent corresponding Safety Data Sheets (SDS) before using any products. The SDS provides information and advice on the safe handling, storage and disposal of chemical products and contains physical, ecological, toxicological and other safety-related data.

APPLICATION INSTRUCTIONS: –

SUBSTRATE QUALITY / PRE-TREATMENT: –

Important: Do not apply on metal surfaces, wood and old ceramic tiles outdoor.

Important: Gypsum plaster and anhydrite screed substrates must have a maximum moisture content of 0.5 %.

MIXING: –

Important: Avoid over-mixing to minimize air entrainment.

Requirement: Use a low-speed electric single paddle mixer (< 500 rpm) with spiral paddle for mixing.

Pour the minimum recommended quantity of clean cold water into a clean mixing container.
Gradually add Sika Ceram-125 Easy Fix powder to the water while mixing.
Mix thoroughly for ~5 minutes until a uniformly colored, smooth mix is achieved. Add additional water, if necessary, to the maximum specified amount.
Do not mix for ~5 minutes to allow mixed product to ‘mature’.
. Remix for ~15 seconds.

APPLICATION: –

Important: Apply sufficient adhesive to ensure adequate ‘wetting’ of the backs of the tiles.

Important: Coverage on the back of the tiles must be 100 %.

Important: Tiling must be carried out on freshly applied adhesive. Exert adequate pressure to ensure 100 % complete and uniform contact with the adhesive to achieve optimum adhesion.

Important: If a skin forms on the surface of the adhesive, immediately remove the adhesive layer with a trowel, discard material and apply a fresh layer of Sika Ceram®-125 Easy Fix adhesive.

Important: Protect freshly applied material from freezing conditions and rain, etc.

Important: For natural stone tiles, always carry out a preliminary test application first. Note: For tiles > 900 cm2 (e.g., 30 × 30 cm), the double spreading (buttering) technique is always recommended