SIKA CERAM 212 – GREY, Tile Adhesives (25 Kg Bag)
Check Availability
Original price was: ₹800.00.₹750.00Current price is: ₹750.00.
Bulk Order →
Brand: Sika
Product Name: Ceram 212 – Grey
Weight: 25 Kg Bag
Usage: High-performance cementitious tile adhesive suitable for fixing ceramic, porcelain, and natural stone tiles on floors and walls
Note: Offers excellent adhesion, flexibility, and resistance to slip and water
Product Description
USAGE:-
- Laying all kind of ceramic, vitrified tiles
- Indoor on walls and floors
- Indoor over‐tiling applications on old tiles, without primer
PACKAGING: –
25 Kg Bag
ADVANTAGES: –
- No vertical slipping
- Application upto 10 mm thick
COLOUR: –
Grey Powder
PRODUCT DETAILS: –Sustainability / Certifications / Approvals: –
APPROVALS/STANDARDS: –
One‐pack improved cement base with No vertical slip adhesive.
Particularly suitable for Ceramic and Vitrified Tiles. EN12004 class C2T.
PRODUCT INFORMATION: –
SHELF LIFE: –
12 months from date of production.
STORAGE CONDITIONS:-
12 months from date of production if stored properly in undamaged original sealed packaging, in dry cooled conditions.
DENSITY: –
1.32 kg/l (Bulk Density)
TECHNICAL INFORMATION:-
TENSILE ADHESION STRENGTH: –
|
Value Grey |
Requirement EN 12004 |
Test Method |
Initial Tensile Adhesion |
1.6 N/mm2 |
> 1.0 N/mm2 |
EN 1348 |
Tensile Bond after Heat ageing |
1.2 N/mm2 |
> 1.0 N/mm2 |
EN 1348 |
Tensile Bond After water immersion | 1.3 N/mm2 | > 1.0 N/mm2 | EN 1348 |
APPLICATION:-
APPLICATION INFORMATION:-
SLIP RESISTANCE:-
Value Grey |
Requirement EN 12004 |
Test Method |
|
Slip Resistance |
< 0.5 mm |
< 0.5 mm |
EN 1308 |
MIXING RATIO:-
~6.5-7.0 ltrs of water (26%-28%) for 25 kg of SikaCeram‐212 Grey
LAYER THICKNESS: –
10 mm max
AMBIENT AIR TEMPERATURE:-
+5°C min; +35°C max
SUBSTRATE TEMPERATURE:-
+5°C min; +35°C max
POT LIFE :-
~3-4 hours at 23°C
OPEN TIME:-
~20 minutes at 23°C
ADJUSTIBILITY TIME:-
~40 minutes at 23°C
CURING TIME:-
Applied product ready for use: Before floor grouting – light foot Traffic 24-36 hours Before wall grouting 4-6 hours
SUBSTRATE QUALITY / PRE-TREATMENT:-
The substrate must be cement laitance free, clean and free from dirt, oil, grease or other contaminants and loose or friable particles. The substrate must be perfectly flat, sound and free from parts easily removed, non-deformable and correctly aged. Any small gradients or bumps can be levelled / filled with a layer of SikaCeram-212 in a maximum thickness of 5 mm, applied at least 24 hours before laying the ceramic coating. For builds greater than 10mm thick, use the appropriate Sika MonoTop or Sika Level product(s). SikaCeram-212 is applied directly on plasters and cementitious substrates, cement-lime mortars, concrete, plasterboard, floater finished concrete and old ceramic floors.
MIXING:-
Mix the contents of a 25 kg bag with the required amount of water (as specified above), using an electric mixer and a suitable mixing spiral at low speed, in a clean bucket. Do not exceed a mixing speed of 500 rpm as doing so may reduce the final strength of the cured product. Mix to obtain a smooth paste free of lumps. After mixing, leave the product for 5 minutes, then briefly stir the mixture prior to application. This should result in a very creamy, easily spreadable, and highly thixotropic adhesive.
APPLICATION:-
Sika Ceram-212 is applied using a notched trowel. The amount of product should be enough to ensure complete wetting of the tile. Tiling has to be carried out on fresh adhesive, exerting an adequate pressure to ensure contact with the adhesive to form a full bond. If a surface film has
formed on the adhesive, it is necessary to trowel over the previously applied adhesive layer. Avoid wetting the adhesive already applied with water. To lay tiles sized 900 cm² (e.g. 30 x 30 cm) or larger, the double-spreading (buttering) thin-bed consistency or single-spreading flow-bed consistency techniques of adhesive application is always recommended. If the substrate is very porous, if the temperature is high and/or the relative humidity low, it is advisable to dampen the surface. Do not leave standing water.
CLEANING OF TOOLS:-
Clean all tools and application equipment with water immediately after use. Hardened material can only be mechanically removed.
FURTHER DOCUMENTS:-
SikaCeram-212 shall not be applied in the following cases:
• On metal surfaces and wood
LIMITATIONS :-
All technical data stated in this Product Data Sheet is based on laboratory tests. Actual measured data may vary due to circumstances beyond our control. Values achieved in laboratory conditions: 23°C ± 2°C – R.H. 50% ± 5%. Higher temperatures reduce the indicated lapse time, oppositely, lower temperatures increase them.
BASIS OF PRODUCT DATA :-
All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
Reviews
There are no reviews yet.