2% off2% off

Sika CoolCoat, Flexible, micro fibre reinforced waterproofing 10kg

Name: Sika CoolCoat, Flexible, micro fibre reinforced waterproofing 10kg
SKU: 16062
Price: 3570.00 INR
Availability: InStock

0 customer reviews

Vendor: Civilismart

Original price was: ₹3,650.00.Current price is: ₹3,570.00.

Bulk Order →

Brand: Sika
Product Name: CoolCoat
Weight: 10 KG
Usage: Flexible, micro fibre reinforced waterproofing coating
Note: Provides excellent waterproofing, reduces surface temperature, and enhances durability

Categories: Building Material Chemicals Tag: SIKA

Product Description

USES :-

Suitable for all types of :

Roof slabs(flat and sloped)
RCC/ asbestos/ lime terraced roofs/ clay tiles etc. after suitable surface preparation and repairs
Sunshades
Suitable as a heat reflective coating on bituminous membrane

CHARACTERISTICS / ADVANTAGES:-

Cross linking polymer gives excellent weather resistance and enhances service life.
High solar reflectance index (SRI) indicates high degree of cooling effect
Crack-bridging High resistance to chloride penetration, hence highly suitable for saline environment.
Algae and fungi resistant
Highly flexible and Vapour permeable
Simple and fast application Excellent adhesion to concrete, brickwork, corrugated asbestos, bitumen,asbestos cement sheet and metal decks
Ultra violet rays and weather resistant
Eco friendly

PRODUCT INFORMATION:-

Chemical Base:-

Acrylic polymer dispersion

Packaging:-

Sika CoolCoat :10 kg x 1, 5kgx 2, 2kgx 2

Sika CoolCoat Primer : 2kgx 2, 1 kg x 2

Sika Fab1: Roll size of 50mx 1m (it is the reinforcement of the Coating System to be bought seperately)

Colour;;-

White & Grey Shade. Light shades can be achieved with help of quality stainer. Pre-test for over paintability and paint compatibility is recommended.

Shelf Life:-

12 months if stored properly in undamaged and unopened original sealed pack

Storage Conditions:-

Store in a cool and dry conditions.

Density;-

~ 1.35 kg/l @ 27°C

Solid content by weight;-

~ 66%

Volatile organic compound (VOC) content:-

< 10 g/l

Overall Thickness:-

~ 1- 1.2 mm (with Sika Fab1)

SYSTEM INFORMATION:-

For Roof without Sika® Fab1

Coat	Product	Consumption
Primer Coat	Sika® CoolCoat Primer	0.2-0.3 kg/m²
First Coat	Sika® CoolCoat	0.75 kg/m²
Second Coat	Sika® CoolCoat	0.75 kg/m²
Top Coat	Sika® CoolCoat Primer	0.05-0.08 kg/m²

For Roof with Sika® Fab1

Coat	Product	Consumption
Primer Coat	Sika CoolCoat Primer	0.2- 0.3 kg/m²
First Coat	Sika CoolCoat	0.75 kg/m²
Fabric Reinforcement	Sika Fab1	1 m²/m²
Second Coat	Sika CoolCoat	0.75 kg/m²
Top Coat	Sika CoolCoat Primer	0.05-0.08 kg/m²

For Walls

Coat	Product	Consumption
Primer Coat	Sika CoolCoat Primer	0.2- 0.3 kg/m²
First Coat	Sika CoolCoat	0.3- 0.4 kg/m²
Second Coat Top Coat	Sika CoolCoat Sika CoolCoat	0.3- 0.4 kg/m² 0.05- 0.08 kg/m²

* Total consumption will however depend on the substrate quality.

APPLICATION INFORMATION:-

Ambient Air Temperature +10 °C min/ +45 °C max

Substrate Temperature +10 °C min/ +45 °C max

Waiting Time / Overcoating ng ~ 6-8 hours @ +30 °C

APPLICATION INSTRUCTIONS:-

SUBSTRATE PREPARATION;-

All dust, loose and friable materials and glaze or varnish of tiles must be completely removed by mechanical means. Existing coatings/ membranes have to be inspected, cleaned and mechanically ground to achieve a sound, gripping substrate. In case of bad adhesion to the substrate, existing coatings have to be removed. In case of application on clay tiles, roughen the surface by grinding and then apply the system.

All uneven surfaces should be properly treated by suitable Sika material to get a plain surface. In case of application on an existing bituminous membrane following procedure has to be followed : After ensuring that the existing membrane has been cleaned properly, apply the C.S. Primer/ Solvent based or Water based on the surface on which the system is to be applied.

Sprinkle a layer of sand on the primered surface immediately and allow it to dry for atleast 12 hours. The surface is now ready to take the Sika Cool Coat System.

APPLICATION:-

Sika CoolCoat is supplied in a single component pack and is in ready to use form. Stir thoroughly using a conventional paint stirrer prior to application. As a part of the System please prime the substrate with Sika CoolCoat Primer Within 2-4 hours of priming, apply 1st coat of Sika CoolCoat by brush or roller. Do not spoil the dry surface while walking on it for application. Place Sika Fab1 over the first coat when it is in tacky condition Apply the 2nd coat of Sika CoolCoat following the same above procedure at suitable time interval of 6-8 hours between the coats. Finally apply a thin layer of Sika CoolCoat Primer. Suitable time interval is 6-8 hours after the second coat dries off. The above mentioned times may vary depending on temperature, humidity and ventilation at site

CLEANING OF TOOLS:-

Clean all tools and application equipment with clean water immediately after use. Hardened / cured material can only be removed mechanically.