9% off9% off

SIKA BLOCK JOINT MORTAR (30 Kg Bag)

Name: SIKA BLOCK JOINT MORTAR (30 Kg Bag)
SKU: 16060
Price: 500.00 INR
Availability: InStock

0 customer reviews

Vendor: Civilismart

Original price was: ₹550.00.Current price is: ₹500.00.

Bulk Order →

Brand: Sika
Product Name: Block Joint Mortar
Weight: 30 Kg Bag
Usage: Ready-to-use mortar for laying AAC blocks, concrete blocks, and fly ash bricks
Note: Provides excellent bonding, reduces shrinkage, and enhances durability

Categories: Building Material Chemicals Tag: SIKA

Product Description

USES:-

Fixing and Jointing masonry units like AAC blocks, Concrete blocks, fly ash bricks etc.

CHARACTERISTICS / ADVANTAGES:-

Ready to use, only water to be added. Thinner jointing material with very high tensile adhesion strength improving the overall masonry strength.
Better bond than conventional cement based mortar
Faster to apply due to good spreadable properties.
Excellent high strength & water retention properties Economical as quantity of mortar is less than conventional mortar ▪ ▪ Self-curing.

PRODUCT INFORMATION:-

Chemical Base:-

Cementitious mortar modified with polymers.

Packaging;-

30 kg bag

Appearance / Colour;-

Grey powder

Shelf Life;-

6 months from date of production

Storage Conditions:-

Stored properly in original unopened, sealed and undamaged packaging in dry and cool conditions.

Density:-

Bulk Density : ~1.33 kg/l (at +27°C)

Compressive Strength:-

>6 N/mm² at 28 days

Tensile Adhesion Strength;-

≥0.8 N/mm²

Consumption;-

~3 -4 kg powder required / Sqm for 3 mm average thickness.

Layer Thickness:-

3-4 mm

Ambient Air Temperature:-

+5°C min. / +45°C max.

Substrate Temperature:-

+5°C min. / +45°C max

Pot Life;-

90 minutes

MIXING:-

Water: Powder = 0.22 to 0.24 by weight (6.6l to 7.2 l water per 30 kg bag). Mixing Time : 3 minutes minimum

APPLICATION:-

Sika® Block Joining Mortar must be mechanically mixed using a forced action mixer or in a clean container using a drill and mixing paddle (< 500 rpm). A normal concrete mixer is not suitable. Mix thoroughly with clean water for a minimum of 3 minutes. Leave material to stand in container until the majority of bubbles have dispersed (minimum 5 minutes).Then remix the material for 15 seconds – the product is now ready for use.

If the substrate is very porous, if the temperature is high and/or the relative humidity low, it is advisable to dampen the surface. Do not leave any standing water. Apply a thin uniform Layer of Sika® Block Joining Mortar 2 to 3 mm thick on the clean & levelled surface of masonry units using proper trowel Place the next course of masonry units on evenly jointing mortar bed in proper line & level.

Each masonry unit shall be properly bedded and set in position by gently pressing with handle of trowel. Inside unit of the masonry unit shall be applied with mortar before the next unit is laid & pressed against it especially in case of bricks. Clean the excess material, if any immediately. Continue the procedure for the entire masonry work. Do not disturb the blocks /bricks setting for first 24 hours

CLEANING OF TOOLS:-

Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be removed mechanically.