SIKA GROUT 214 INS (30 Kg Bag)

Product Description

USES:-

• To grout bearings, machine foundations, columns joints in precast construction etc.
• To grout anchors in concrete
• To grout cavities, gaps and voids in concrete To grout base plate of turbine, compressor, boilers, pumps and heavy machinery.
• Sealing around penetrations
• Post fixings

CHARACTERISTICS / ADVANTAGES

• Dual shrinkage compensated
• Suitable for temperature of above 0 °C to 200 °C
• Easy to use, ready to mix powder
• Easy to mix, only add water
• Adjustable consistency
• Very good flow characteristics
• Rapid strength development without surface crack
• Excellent bond to concrete
• No segregation or bleeding
• High final strengths
• Initial expansion by gas generation
• Impact and vibration resistant Non-corrosive to anchor bolts, base plate / saddle / frame, sliding plate
• Not harmful to concrete and reinforcing steel
• Not flammable
• Non-toxic
• Frost, oil and fire resistant
• Require normal curing Suitable to use under restraints and grout thickness required
• Expansive to counteract initial shrinkage Maximum flow distance is compatible to the dimensions of base plate / saddle / frame
• Resistant to the chemicals, gases etc. being handled in equipment
• Chloride free

PRODUCT INFORMATION;-

Chemical Base;-

Cement, special additives, and aggregates

Packaging:-

30 kg bag

Appearance / Colour:-

Grey powder

Shelf Life:-

6 months from date of production

Storage Conditions:-

Store properly in dry conditions in undamaged and unopened original sealed packaging. 

Bulk Density:-

1.15–1.60 kg/L (dry powder density) at +27 °C

Maximum Grain Size:-

2.36 mm

Product Declaration:-

ASTM C1107

APPLICATION INFORMATION:-

Mixing Ratio:-

Flowable          Water : Powder = 0.15–0.16 by weight       4.5–4.8 litres water per 30 kg bag

Pourable          Water : Powder = 0.14 by weight                  4.2 litres water per 30 kg bag

Fresh mortar density:-

2000–2300 kg/m3

Consumption:-

~1950 kg/m3 at water to powder ratio 0.15

Layer Thickness:-

100 mm max.

Ambient Air Temperature:-

+5 °C min. / +40 °C max

Substrate Temperature:-

+5 °C min. / +40 °C max.

Pot Life:-

~20 minutes at +30 °C

Initial Set Time:-

~30 minutes

MIXING:-

SikaGrout-214 IN can be mixed with a low speed (< 500 rpm) hand drill mixer to avoid entraining too much air. Mix only full bags for best results. Pour around 80 to 90% of the recommended water in a suitable mixing container. While stirring slowly, add the powder to the water and mix thoroughly at least for 3 minutes adding balance water within the mixing time to the maximum specified amount to adjust the grout to the required consistency and flow properties. Do not mix more grout, which cannot be used within pot life. Do not add extra water.

APPLICATION:-

Remove excess water from substrate surface e.g. with clean sponge, until surface is dark matt in appearance without glistening (saturated surface dry). Surface pores and pits shall not contain water. Let the grout stand for ~5 minutes to release air entrained by mixing. Pour grout immediately after mixing into the prepared openings using a sufficient pressure head to maintain a continuous flow of grout. Ensure air displaced by the grout can easily escape, otherwise entrapped air will prevent full contact grouting. For optimum use of the expansion properties apply the grout as quickly as possible, within ~15 minutes after mixing.

CURING TREATMENT:-

Keep visible exposed grout surfaces to a minimum. Protect the fresh material from premature drying using appropriate curing method e.g. curing compound, moist textile membrane, polythene sheet etc.

CLEANING OF TOOLS :-

Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be mechanically removed.

More Products From This Vendor

34% off34% off

Add to cart

Add to wishlist

FLUSH 3 PIN SOCKET – 6A. F/T SOCKET (ALLWYN)

0

₹47.00 Original price was: ₹47.00.₹31.00Current price is: ₹31.00.

Vendor: test

30% off30% off

Add to cart

Add to wishlist

Bib Cock With Wall Flange – Fortuner (ARIS) – FOR – 801

0

₹2,119.00 Original price was: ₹2,119.00.₹1,483.00Current price is: ₹1,483.00.

Vendor: Civilismart

20% off20% off

Add to cart

Add to wishlist

ANGULAR STOP COCK WITH WALL FLANGE – (HINDWARE – F850077)

0

₹767.00 Original price was: ₹767.00.₹614.00Current price is: ₹614.00.

Vendor: Civilismart

27% off27% off

Add to cart

Add to wishlist

6 A 3 Pin Socket with Shtutter (ISI)

0

₹62.00 Original price was: ₹62.00.₹45.00Current price is: ₹45.00.

Vendor: Avadh Enterprise (HAVELLS)

20% off20% off

Add to cart

Add to wishlist

MATTE BLACK SINGLE LEVER BASIN MIXER (QUEO) – (F LE-FORME – Q673123124)

0

₹54,277.00 Original price was: ₹54,277.00.₹43,422.00Current price is: ₹43,422.00.

Vendor: Civilismart1