SIKA MULTISEAL T – Self-adhesive elastomeric bituminous sealing tape (4″ X 10M)
Check Availability
Original price was: ₹1,700.00.₹1,620.00Current price is: ₹1,620.00.
Bulk Order →
Sika® MultiSeal T is a self-adhesive, modified bituminous sealing tape laminated with an aluminum film on the upper side.
- Very easy to apply
- Can be applied at low temperatures
- Good adhesion to many common building materials
Product Description
USAGES: –
Repairing, protecting and sealing applications:
- Roofs including sheet metal work
- Facades
- Broken roof tiles
- Leaking roof gutters
- Chimneys and roof lights
- Caravans and trailers
- Office containers
- Various types of ductwork
ADVANTAGES: –
- Very easy to apply
- Can be applied at low temperatures
- Good adhesion to many common building materials
- Weather-proof
- Resistant to UV exposure
- Self-adhesive
- Can be over-painted
PACKAGING: –
- WIDTH – 4″
- LENGTH – 10 METER
COLOUR: –
-
Top (aluminum film side)
silver
Bottom (release film side)
grey / black
PRODUCT INFORMATION: –
- CHEMICAL BASE: – Modified bitumen and aluminium film
- SHELF LIFE: – 24 months from date of production
- STORAGE CONDITION: – The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C. Always refer to packaging.
APPLICATION STEPS: –
SUBSTRATE PREPARATION
The substrate must be stable, clean, dry and free of all contaminants such as dirt, oil, grease, cement laitance, old sealants and poorly bonded paint coatings which could affect adhesion of the adhesive / sealant. The substrate must be of sufficient strength to manage with the stresses induced by the tape during movement. Removal techniques such as wire brushing, grinding, sanding or other suitable mechanical tools can be used. All dust, loose and friable material must be completely removed from all surfaces before application of any activators, primers or tapes.
Sika® MultiSeal T generally has good adhesion without primers / activators to most dry, clean and sound substrates.
Primer-600 can be used to improve adhesion. For optimal results, the following procedure must be carried out:
Nonporous substrates
Metals, plastics, coated surfaces, glazed tiles and similar substrates must be cleaned and pre-treated with Sika®Aktivator-205 by using a clean towel. Before sealing allow a flash-off time > 15 min (max. 6 hours).
Porous substrates
Concrete, aerated concrete and cementitious plasters, mortars, brick, etc. can be pre-heated to increase the adhesion.
Reviews
There are no reviews yet.