4% off4% off

SIKA TOP SEAL 107 Water Proofing Chemicals (25 KG)

Name: SIKA TOP SEAL 107 Water Proofing Chemicals (25 KG)
SKU: 16059
Price: 1870.00 INR
Availability: InStock

0 customer reviews

Vendor: Civilismart

Original price was: ₹1,950.00.Current price is: ₹1,870.00.

Bulk Order →

Brand: Sika
Product Name: Top Seal 107
Weight: 25 KG
Usage: Two-component, cementitious waterproofing and protective coating for concrete and masonry
Note: Suitable for use in water tanks, basements, balconies, and other areas requiring waterproofing and protection.

Categories: Building Material Chemicals Tag: SIKA

Product Description

USES:-

Waterproofing applications for various structures such as:
Potable concrete water tanks, reservoirs, waste water tanks
Terraces, balconies, sunshades, etc.
Flat and small roofs
Basement and Retaining walls
Swimming pools, fountains, water bodies, canals
RCC gutters, drains and planter boxes
Wet areas like toilets, kitchen, utility, sunk slabs
Lift pits, sump, etc.
Interior and exterior waterproofing and damp-proofing of concrete, cementitious rendering, brickwork and blockwork
Protection of concrete structures against the effects of de-icing salts and freeze-thaw attack
Pore / blowhole filling Sealing fine “hairline” cracks in concrete structures not subject to movement
Sealing internal basement walls against dampness

CHARACTERISTICS / ADVANTAGES:-

Easy to apply by brush, spray or flat trowel
No additional water is required to make the slurry
Pre-batched components with consistent quality
Easy and fast mixing Highly water resistant, reduces saltpetre action and prevents carbonation
Protects concrete from chloride penetration
Non-corrosive to steel and iron
Approved for potable water contact
Flexible enough to bridge hairline crack
Bonds well to all damp substrates
Good abrasion resistance Good adhesion to reinforced concrete, mortar or masonry
Fast curing

APPROVALS / STANDARDS:-

SGS Certificate – Free from acute lethal toxicity as per IS 6582
CFTRI Certificate for repeated use with aqueous foods / water as per USFDA 175.300

PRODUCT INFORMATION:-

Chemical base:-

Part A Acrylic polymer

Part B Portland cement with selected aggregates and additives

Packaging;-

Part A+B pre-batched 25 kg set

Part A 5 kg container

Part B 20 kg bag

Shelf life 12 months from date of production

Storage conditions The product must be stored in original, unopened and undamaged sealed packaging in dry

conditions at temperatures between +10 °C and +35 °C. Liquid component must be protected from frost.

Appearance / Colour:-

Part A+B mixed Grey slurry

Part A White liquid

Part B Grey powder

APPLICATION INFORMATION:-

Mixing ratio;-

Part A : Part B = 1 : 4 (by weight)

Consumption:-

Layer Product Consumption

Base coat SikaTop-107 Seal IN ~1.5 kg/m2

Top coat SikaTop-107 Seal IN ~1.5 kg/m2

Note: The consumption will vary depending on application area, substrate type, substrate roughness, surface profile, absorption of the surface and thickness required.

Layer thickness;-

~1.2–1.5 mm in 2 coats

Ambient air temperature:-

+10 °C min. / +40 °C max

Substrate temperature;-

+10 °C min. / +40 °C max.

Pot life:-

~40 minutes (100 g mass, +27 °C)

Applied product ready for use;-

Foot traffic ~1 d

Water immersion ~7 d

IMPORTANT Applied SikaTop-107 Seal IN must not be subjected to ponding before 7 days. Contact Sika Technical Services and refer to ASTM D5957 for more information.

APPLICATION INSTRUCTIONS:-

Mixing:-

Electric drill paddle mixer (> 700 W, 300 to 500 rpm)

Application:-

Hard bristled brush
Squeegee
Flat trowe

SUBSTRATE QUALITY / PRE-TREATMENT:-

The concrete substrate must be sound and with a minimum pull off strength of 1.0 N/mm2.
The substrate must be free of all traces of contaminants, loose and friable particles, cement laitance, oils and grease, wax, curing compounds, water repellent coatings etc.
The substrate must be prepared by suitable mechanical preparation techniques such as high pressure water jetting, needle guns, grinding, blast cleaning etc.
High spots must be removed by grinding. Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed.
Repairs to the substrate, filling of blowholes/voids and surface levelling must be carried out using appropriate products from the Sikafloor, Sikadur and Sikagard range of materials.
All dust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by brush and/or vacuum.
Any wax based curing compounds or water repellent coatings must be fully removed by scraping or grinding.
All intersections of horizontal and vertical surfaces should be profiled with a mortar fillet of minimum 25 mm × 25 mm.

MIXING:-

IMPORTANT Do not add water in any circumstances.

Waterproofing coating:-

Pour full quantity of SikaTop-107 Seal IN Part A into a clean mixing container.
While stirring slowly, add SikaTop®-107 Seal IN Part B.
Mix thoroughly for 3 minutes, until free from lumps and smooth consistency is achieved.

Waterproofing mortar:-

Pour 90 % of SikaTop-107 Seal IN Part A into a clean mixing container.
While stirring slowly, add SikaTop-107 Seal IN Part B.
Mix thoroughly for 3 minutes, until free from lumps and smooth consistency is achieved

APPLICATION;-

IMPORTANT SikaTop-107 Seal IN may display signs of “blooming” after rain or in damp weather. This does not affect the performance of the coating in any way.

IMPORTANT Do not apply in direct sun and/or strong wind.

IMPORTANT In areas of severe water penetration, three coats might be required.

IMPORTANT Protect freshly applied material from freezing conditions, rains etc.

Detailing:-

Seal all penetrations with a suitable Sika sealant like SikaSwell S-2 or Sikagard 694 F(I) epoxy putty to prevent any leakage from the periphery of the down take pipes.
Additionally, if so desired cut Sika Fabric-50 to desired dimensions for detailing on intersections and also around pipe penetration by embedding it with the SikaTop-107 Seal IN.
Sika SealTape F is recommended to be used as a component of a composite sealing system in conjunction with SikaCeram® tile adhesive and ceramic tiles to achieve water tightness in wet rooms and around wet areas.

Waterproofing coating:-

Thoroughly pre-wet the prepared substrate (2 hours recommended) before application. Keep the surface wet and do not allow to dry. Before application remove excess water, e.g. with a clean sponge. The surface must appear a dark matt appearance without shining and surface pores and cavities must not contain water
Apply the first coat of SikaTop-107 Seal IN with a hard bristled brush or broom applied in the same direction and leave to harden for 2 to 6 hours.
(Optional) Wherever coating is to be reinforced with glass fabric, lay Sika Fabric-50 into the freshly applied base coat and embed firmly into the wet coat with brush.
Apply the second coat of SikaTop-107 Seal IN in crosswise direction to the first application as soon as first coat has hardened.

CURING TREATMENT:-

Cure SikaTop-107 Seal IN for minimum 7 days to ensure full cement hydration and minimise cracks. Use wet hessian cloth, spray curing or similar approved methods during the recommended period of curing.

CLEANING OF TOOLS:-

Clean all tools and application equipment with water immediately after use. Hardened material can only be removed mechanically.